滑板英語作文

① 滑板的英文

Skateboard

② 滑板的介紹中文加英文

在十九世紀五十年代末的太平洋彼岸，善於發明創造的愛迪生的後裔們把古老神州人們的幻想或多或少地變成了現實。五十年代初美國西海岸是弄潮兒們大試身手的地方。他們使用普通木頭和價格昂貴的輕木製成的沖浪板在風口浪尖上尋找樂趣。到五十年代中期，模壓聚氨酯泡沫和玻璃纖維取代了木製沖浪板。這些新型沖浪板的機動性和耐用性使得沖浪運動在五十年代末大為流行。
滑板運動是沖浪運動在陸地上的延伸。前者受地理和氣候條件的限制，而後者則有更大的自由度。陽光明媚的南加州海灘社區的居民們很快制出了世界上第一塊滑板。
在今天看來，那是相當古樸的一項發明:一塊50*50CM的木板固定在輪滑的鐵輪子上.即使這樣一個簡單的運動器械，因為它能提供沖浪給人帶來的同樣心理感受，也引起了人們的足夠興趣。
但是，這種第一代滑板由於其本身的落後性（板太笨重，無彈性，轉向機構不靈敏，輪子太滑等），滑板運動並未得到像今天這樣的普及，這種最早的滑板可以在滑板錄像節目《禁止》(Ban This)中看到。
第2代的滑板誕生於1962年。這是由橡木多層板壓制而成的15*60厘米的板面、輪滑轉向橋和塑料輪子組成的。和第一代滑板相比，這種滑板無疑是技術上的一個飛躍。但是，這種滑板的塑料輪的性能依然很不理想。他的過小的附著摩擦力使滑板急轉彎時失控；而他的低彈性則是滑板遇到即使微小的障礙物也會嘎然而止，把滑手摔下來。同時，他的耐磨性也太差。盡管如此,這種滑板仍然受到滑手們的普遍歡迎。畢竟，和前一代滑板相比，它已經有了很大程度的進化，相對寬大的板面使滑手們更容易站立和操縱。中國國內現在銷售的滑板大多數屬於這種第二代產品。
1973年，一個叫弗蘭克·納斯沃西的滑板愛好者第一次把聚氨酯輪子安上他的滑板並取得意想不到的效果。他隨即開始把這種叫「卡迪拉克」牌的輪子賣給他的滑板朋友們。這種柔韌的輪子不僅耐磨，而且可以使滑板安全穩當的急轉彎，輕而易舉的碾過地上的小障礙物。第三代滑板就這樣發明了。由於滑板從沖浪衍生的原因，七十年代初的滑板文化基本上是帶有沖浪印記的文化。滑板愛好者和滑板公園的建設者們一開始建造了不少模擬沖浪的地形。後來，他們終於意識到，由於滑板比沖浪板的阻力小，重量輕，可以建立不同於沖浪而更適合滑板的地形以取得更大的速度、機動性和自我表現能力。
加州Santa Monica 的「West wind」滑板隊把廢棄的鑰匙孔型泳池作為練習垂直表面滑板的場地，一時間在加州形成了尋找泳池熱。從這時起，滑板運動與沖浪運動不僅是從器材、場地，也從人員上，徹底分離出來，成為突起的一支異軍。這支新軍不涉足沖浪，一心鑽研滑板，並開始形成自己的語言、技巧、衣飾風格和音樂愛好。形成了新生的、以城市為主導的滑板次生文化。
七十年代中期是第三代滑板飛速發展的時期。預感到一種新型的體育運動就要應運而生，無數個由滑板和沖浪愛好者建立的小型滑板公司如雨後春筍般出現，開始在技術質量上展開全面的競爭。聚氨酯輪子的潛力被充分挖掘出來。不斷改進的聚氨酯輪子使滑板附著摩擦力加強，速度增加，甚至可以滑上垂直表面。
此外，對滑板材料的研究開發也達到了窮及一切的地步。硬塑、鋁合金、玻璃纖維，甚至高科技的碳素復合材料都被用來試制滑板。最終，抗沖擊性能好，重量輕的加拿大糖楓擔負起了新一代滑板材料的歷史使命。
另外，由Powell公司發明的跨越大障礙物的聚氨酯輪子和斯蒂文森專利的凹型滑板尾部使第三代滑板更上一層樓。
80年代末，由於滑板運動本身的發展和滑手們對滑板技巧要求的提高，以及為了適應U型池（vert ramp）雙向滑行的需要，一種與前三代滑板形狀完全不同的兩頭翹起、形狀對稱的滑板出現了，這就是第四代滑板。目前只有滑手們使用的都是第四的滑板。第四代滑板改用硬岩楓重量更輕，彈性更好.滑板輪硬度高,彈性好,更適合高速滑行.由於重量平衡,第四代滑板更適合各種翻轉動作。
九十年代初，滑板運動走入了一個低谷時期。由於正處於滑板換代的時期，滑板從一頭改為兩頭，因而出現了許多前一代滑板不可能完成的動作。這個時期是滑板運動的技巧性動作（technical tricks)時代。滑手們發明了很多新的動作。同時為了使滑板更容易翻轉，滑板板面變得很窄，輪子變得很小。這個時期一塊典型的滑板寬度只有7英寸，而輪子直徑只有39mm左右。這樣的滑板雖然更易於做出復雜的動作，但是較小的輪子卻妨礙了它的滑行性能。
==========
Fifty years in the late nineteenth century, on the other side of the Pacific, at the Edison inventions were the descendants of ancient China to a greater or lesser extent people's fantasies become a reality. The beginning of the fifties the U.S. West Coast is a major test of beach-goers have a place to test their abilities. They use the high cost of ordinary wood and light wood surfboard into waves in the air to find the fun. To the mid-fifties, molded polyurethane foam and fiberglass replaced the wooden surfboard. These new surfboard flexibility and rability make surfing much in popularity at the end of the fifties.
Surfing skateboarding is an extension of the land. The former by the geographical and climatic conditions, while the latter have greater flexibility. Sunny beaches of Southern California residents in the community quickly proced a piece of the world's first skateboard.
It seems today, it is a very simple invention: a piece of wood 50 * 50CM iron fixed in the roller wheels. Even such a simple sports equipment, because it can offer the same Surf bring psychological feelings, but also aroused sufficient interest.
However, this first generation of skateboards as a result of the backwardness of their own (too heavy plate, inflexibility, insensitivity steering, wheels too slippery, etc.) have not been as skateboarding's popularity today, the first slide board skateboarding video in the "prohibited" (Ban This) see.
No. 2 on behalf of the skateboard was born in 1962. This is made from oak to suppress MLB 15 * 60 cm board, roller bridge and plastic wheels turn composed of. And the first generation of skateboarding, this skateboard is a leap in technology. However, this skateboards-round performance of the plastic is still much to be desired. His force is too small to make the attachment a sharp turn when the out-of-control slide; and his flexibility is low, even if small skateboard obstacles encountered also to hand down to slide. At the same time, he is also poor wear resistance. Nevertheless, this is still slippery slide their hands in general. After all, compared to the previous generation of skateboards, which have a high degree of evolution, a relatively large surface of the plate so that the hands were slippery to stand up and manipulated more easily. China's domestic sales are now the majority of skateboard procts this is the second generation.
In 1973, a man named Frank skateboard enthusiasts納斯沃西the first time he installed polyurethane skateboard wheels and achieve an unexpected effect. He then began to call this "Cadillac" brand of skateboard wheels sold to his friends. This flexibility not only the wear resistance of the wheels, and skateboarding safety could turn secure, easy to run over small obstacles on the ground. In this way the third generation skateboard invented. As a result of surfing skateboarding derived from reason, the beginning of the seventies skateboard culture is imprinted with the culture of surfing. Skateboard park, skateboard enthusiasts and builders have begun the construction of a simulated surfing a lot of terrain. Later, they finally realized that, because of the surfboards skateboards resistance than the small, light weight, can create different from the surf and the terrain more suitable for skateboards in order to achieve greater speed, mobility and ability to self-expression.
Santa Monica, California's "West wind" skateboard team abandoned the key to pass the swimming pool as a practice venue skateboard vertical surface, a time to find form in the California heat swimming pools. From that time on, skateboarding and surfing, not only from the equipment, the venue, but also from the staff, the completely separate process to become a new horizon. The new army is not involved in surfing, skateboarding one study, and began to take shape in their own language, skills, clothing and music-loving style. The formation of a new life to city-led secondary skateboard culture.
The third generation of the mid-seventies was a period of rapid development of skateboarding. A feeling that will be a new type of sports came into being, numerous skateboarding and surfing enthusiasts from the establishment of a small skateboard company like mushrooms appear in the technical quality of the competition to carry out comprehensive. The potential of polyurethane wheels are fully excavated. Continuous improvement to make the polyurethane skateboard wheels attached to enhance the friction, the speed increase, or even slip on a vertical surface.
In addition, materials research and development of skateboarding has reached the point where the poor and all. Hard plastic, aluminum, fiberglass, and even high-tech carbon composite materials have been used to skateboard trial. Ultimately, good shock resistance, light weight maple sugar in Canada take on a new generation of mission skateboards materials.
In addition, the company invented by Powell big barrier across the Stevenson patent polyurethane wheels and the rear of the concave so that the third generation skateboard skateboard the next level.
The late 80's, e to the development of skateboarding itself and sliding on the skateboard in hand skills required, as well as in order to meet the U-Chi (vert ramp) needs two-way slide, a slide with the three generations of two completely different shape tilt, the shape of a symmetrical skateboards, skateboard This is the fourth generation. At present, only slippery hands are used by the Fourth of skateboarding. Slide switch to the fourth generation of hard rock maple lighter weight, better flexibility. Skateboarding round of high hardness, good elasticity, more suitable for high-speed taxiway. Because of the weight balance, the fourth generation is more suitable for a variety of flip skateboard action.
The early nineties, skateboarder into a low period. As the new generation is in a period of skateboards, skateboards changed from a 2, resulting in a lot of skateboards can not be completed before the generation of action. That period was a skateboarder and action skills (technical tricks) era. Waterloo hands were invented many new moves. At the same time in order to more easily flip skateboards, skateboarding has become a very narrow face plate, the wheel has become very small. This time the width of a typical skateboard, only 7 inches, and wheels about the diameter of only 39mm. Although this kind of skateboard to make it easier for complex movements, but has smaller wheels glide hamper its performance.

③ 滑板(英語)

Skateboarding doesnt have a certain origin. Nobody truly knows which is it. Some people believe that Skate began on the surfing beaches of California, U.S.A. around the 50s. People say that some surfers put wheels on a piece of wood. This began because of the lack of good waves to surf, and surfers just looked for another sport when this happened. It mainly started like sidewalk surfers?

The design of skateboards was inspired in surfboards, at the beginning they where quite similar, but with the time the design changed because of commodities. The first manufactured skateboards where born in 1965. They were an inch thick, had rubber wheels, and cast ?iron trucks.

Competitions soon started down the sidewalks between skateboarders, some of this were: Free Style, Slalom, Down Hill, High Jump and finally Long Jump. Some time passed by, and skateboarders started using drainage channels, routes, and some places around buildings.

Vert skating began using swimming pools. The transitions were too vertical and fast, and jumps turned better.

The first Skateparks were built in the U.S. This were the main hang-out places for skaters, soon, pool and Vert skating became the most popular form of skating. Vert skating demanded harder boards, so manufacturers built them wider for more stability and changed the old rubber wheels for polyurethane wheels, which were faster!

Barefoot skating was now forgotten except by a few of the old die-hard "sidewalk surfers". The new skaters figured out that gym shoes had more stability and didn't hurt as bad when you wipe-out.

Early eighties arrived with a dive in skateboarding popularity. Skateparks closed the doors, manufacturers stopped manufacturing and worst of all, skateboard magazines switched over to BMXing and roller-skating. But a few hardcore skaters kept going. Those dedicated skaters advanced skateboarding cy creating their own techniques, writing their own magazines, and building some of there own boards and layouts.

This is when half-pipes arrived. Simpler and cheaper than pools, they could be built by the skater himself. Tricks were used in street skating that, before, had only been used by Vert skaters, Street ollies, slide'n'rolls, and curb grinds( most of which have different names now) are classic as street skaters moves, all of which were made by Vert skaters. Street skating is still probably one of the most popular forms or boarding. Every skater is a street Slater because that's where his roots are from. It's just that some skaters forget a few things along the way.

④ 滑板的英文是什麼

滑板的英文是：skateboard

讀音：英['skeɪtbɔːd]美['skeɪtbɔːrd]

n.滑板；溜冰板(一種裝有滑輪的橢圓形滑板)

v.滑滑板

相關短語

1、Skateboard City街頭極限滑板

2、Crazy Skateboard瘋狂滑板

3、Skateboard Bearings滑板軸承

4、Skateboard Street滑板公園賽

常見句型：

1、Kittyhasascarfandaskateboard.

基蒂有個圍巾和溜冰板。

2、Hetakesmefor ridesonhisskateboard.

他玩滑板的時候也讓我坐上去。

3、Ilovemyskateboard,itgivesmeinfinitepleasure.

我愛我的滑板，它帶給我無限的快樂。

4、Shefelldownfromtheskateboard.

她從滑板上摔了下來。

(4)滑板英語作文擴展閱讀：

近義詞：slide、skateboarding

1、slide

讀音：英[slaɪd] 美[slaɪd]

釋義：vi.滑動；下滑；滑入；悄悄地溜走

vt.使滑動

例句：If you pull this lever, the roof will slide back.

拉一下這根桿,頂就往後滑動。

2、skateboarding

讀音：英['skeɪtbɔːdɪŋ] 美['skeɪtbɔːdɪŋ]

釋義：n.滑板運動；踩滑板

例句：Skateboarding is a challenging,sometimes dangerous sport.

滑板運動是一項很有挑戰性，有時甚至是很危險的運動。

⑤ 關於滑板的英文介紹 幫忙翻譯下 ！！！！求大神！！

Skateboard project is the historical founder of extreme sports, extreme sports are a number of projects extending from skateboarding.At the end of the 50's and early 60's by surfing evolved in skateboarding, and now has become one of the world's most "cool" movement.Skateboarding tricks include: (on the slide rod, the U stage, Ollie, these techniques can be in addition to the turning plate outside the most important skateboard action.
If can have the
In the eighteen fifties at the end of the Pacific, an inventive Edison descendants of the ancient Chinese people's fantasy or reality.At the beginning of fifty time west coast of the United States is the beach-goers are trying.They use the ordinary wood and expensive light wood surfboard in looking for fun in the teeth of the storm.To fifty time metaphase, molded polyurethane foam and fiberglass replaced the wooden surfboard.These new surfboard mobility and rability makes surfing in the late fifty's big popular.Skateboarding is surfing on land extension.The former is affected by geographical and climatic conditions, while the latter has a greater degree of freedom.Sunny southern California beach community residents soon proced the world's first skateboard.

⑥ 英語作文關於學習滑板

A few days ago, my mother gave me a scooter. I am very, very happy! So I started practicing how skateboard. Mother said: "For security reasons the first practice at home now.!" I went to learn how to listen to my feet let slide command. But even on a skateboard it is so hard! A foot on a skateboard on the legs in the air and fell. Before long my ass seriously injured. Hey! Sad to say! Then I finally thought of a good way, his hands leaning on the table to start a new practice, finally taken the first step. But the body's sense of balance is not good, not three-line skate, feet on the earth. By repeatedly practice a morning, and watch the exercises discs. I finally learned how to skateboard. I am very happy

⑦ 介紹滑板的英文文章

Skiboarding is a winter sport which combines elements of skating, snowboarding, and skiing. Skiboards are generally 80-120 centimeters long, symmetrical, twin tipped, and wider than traditional skis. In addition, they generally have non-release bindings, very similar to snowboard hard-boot bindings. However, skiboards are now on the market which feature ski-like releasable bindings. The sport is often referred to (especially in the UK) as snowblading or skiblading, however, "Snowblades" are a trademark of Salomon.

The first prototype of the modern skiboard was the Atomic Glider (later renamed the Figl), a 63.5 centimeter bindingless ski designed in 1982 to fit into a hiker's backpack and sold primarily in Colorado. Around 1990, Austrian company Kneissel introced the BigFoot, a 65 centimeter, foam-injected ski with a binding system. Some consider the BigFoot to be the first mass-proced skiboard. Next came the MicroSki, created by Kent Keiswieller in 1992.

From 1993-1996, the first procts actually referred to as skiboards were manufactured by several pioneer companies, including Canon, Line, GrooveUSA, Klimax, and Powder Company.

In 1997, French ski company Salomon released their version of skiboards, called Snowblades, in response to skiboarding's growing popularity. Soon many larger ski companies such began to proce skiboards.

Skiboarding was replaced with skiing in the X Games, a hard hit to the United Skiboard Series (USS). Professional skiboarders no longer had a forum to compete, and several professional skiboarders including Mike Nick, Iannick B., and Nicky Adams switched to freestyle skiing. The lack of a professional circuit caused skiboarding to drop in popularity around 2001.

Since then, skiboarding has been growing a steady following. Some elements of skiboarding are easier to learn than skiing, so many people with little or no experience in snow sports can use it as an easy way to get down the slopes. Skiboards can also be used as a tool to learn skiing, or as a change of pace for advanced skiers. The short length and sidecut of skiboards makes them easier to turn than traditional skis, but their short length also makes it more important to have a centered stance. Because of the shorter length, skiboarding is hard to perfect where longer skis give an advantage, such as when performing aerial maneuvers, skiing through soft snow or powder, and generally more aggressive skiing.

In 2004, Bentfilms released White Dwarf, a skiboarding video highlighting the technical possibilities of skiboarding, separating it from skiing, and showcasing the talents of many new riders.

2007 marked a landmark in the advancement of skiboarding, as riders from around the world came together in Predeal, Romania for the first ever Skiboard World Cup. Three freestyle events were held (Rail Jam, Big Air and Slopestyle) as well as three racing events (Skiboard Cross, Fakie Downhill and Chinese Downhill). The World Skiboard Association was the main organizer of the event.

⑧ 急！！！關於向大家介紹滑板的英語作文 要開頭結尾完美的那種 150-200字左右。

dsgsf

⑨ 玩滑板英文可以說play skateboard嗎

"play skateboard"的說法不能說不對，但國外「玩滑板」英語習慣說：go skateboarding/go skating。skateboard和skate可以與go連用，構成go＋v-ing的結構。

單詞解釋：

1、skateboard意為：

n. 溜冰板；

vi. 用滑板滑行；

2、skate意為：

vi. 滑冰；滑過

n. 溜冰；冰鞋

n. (Skate)人名；(瑞典、英)斯卡特

相關句子：

1、How often do you go skateboarding?

你多久玩一次滑板？

2、I usually go skateboarding when I am free.

當我有空的時候經常去玩滑板。

3、We love skateboard! Go Skateboarding Day!

在這一天裡面，只有滑板！

4、Me, too. Do you enjoy skateboarding?

我也是. 你喜歡玩滑板嗎？

5、I tried to go skateboarding once, but my balance was bad and I fell down.

我曾嘗試玩滑板，不過因為平衡感不好，所以摔跤了。

(9)滑板英語作文擴展閱讀

相關短語：

1、roller skate 溜冰鞋 ; 雙排輪 ; 輪式溜冰鞋 ; 輪滑鞋

2、Skate Scooter 四輪滑板 ; 滑板車

3、ice skate 溜冰鞋 ; 滑冰 ; 賣冰鞋 ; 在冰上溜冰

4、Inline Skate 直排輪 ; 直排輪滑鞋 ; 溜冰鞋 ; 極限滑板

5、skate over 掠過 ; 一筆帶過

6、Fitness Skate 煉用的 ; 固定碼